The Deponti Pinela Tilt arrives as a flat-packed kit of powder-coated aluminium sections, fixings and roof panels, supplied with a step-by-step assembly manual.

It can be wall-mounted onto a sound masonry wall or built as a freestanding structure on posts, so it suits both lean-to and open-garden layouts.

Because the roof is motorised, the electrical connection should be completed by a qualified electrician, and the motor and remote are then paired following the pairing sequence in the manual.

If you would rather not build it yourself, our nationwide network of approved installers can survey your site and fit it for you.

Wipe the powder-coated aluminium frame with mild soapy water two or three times a year to keep the finish looking sharp, and dry it off to prevent watermarks.

Rotate the louvres flat and wipe each blade with a soft, damp cloth. Because the blades close to shed rain, most dirt washes away naturally between cleans.

Keep the integrated drainage channels and post outlets clear so water always has a route away from the structure.

Keep the motor and control unit dry and free of debris, and never pressure-wash the drive components; a periodic check of the seals keeps everything running smoothly.

The integrated LED fittings are sealed for outdoor use and simply need an occasional wipe with a dry cloth.

The powder-coated aluminium frame is covered by a 5 year warranty against paint defects such as peeling, blistering or premature deterioration under normal residential use.

The motor is covered by a 5 year warranty against mechanical or electrical failure, with the remote controls and control boards covered for 2 years.

The integrated LED lighting carries a 2 year warranty.

In coastal, high-moisture or chemical environments the paint warranty is reduced to 2 years due to accelerated wear. Cover applies under normal residential use and excludes damage from misuse, storm events beyond design loads, or unauthorised modification.

The Deponti Pinela Tilt is delivered on a pallet by kerbside freight to mainland UK addresses, with lead times confirmed at the point of order.

Because the aluminium sections and roof panels are long, please make sure there is clear access for a pallet delivery and somewhere safe to store the kit until installation.

We will contact you to arrange a delivery date, and someone should be available to check the consignment against the packing list on arrival.